" Vim syntax file
" Language:      Perl POD format
" Maintainer:    vim-perl <[email protected]>
" Previously:    Scott Bigham <[email protected]>
" Homepage:      http://github.com/vim-perl/vim-perl
" Bugs/requests: http://github.com/vim-perl/vim-perl/issues
" Last Change:   2017-09-12

" To add embedded POD documentation highlighting to your syntax file, add
" the commands:
"
"   syn include @Pod <sfile>:p:h/pod.vim
"   syn region myPOD start="^=pod" start="^=head" end="^=cut" keepend contained contains=@Pod
"
" and add myPod to the contains= list of some existing region, probably a
" comment.  The "keepend" flag is needed because "=cut" is matched as a
" pattern in its own right.


" Remove any old syntax stuff hanging around (this is suppressed
" automatically by ":syn include" if necessary).
" quit when a syntax file was already loaded
if exists("b:current_syntax")
  finish
endif

let s:cpo_save = &cpo
set cpo&vim

" POD commands
syn match podCommand    "^=encoding"  nextgroup=podCmdText contains=@NoSpell
syn match podCommand    "^=head[1234]"  nextgroup=podCmdText contains=@NoSpell
syn match podCommand    "^=item"        nextgroup=podCmdText contains=@NoSpell
syn match podCommand    "^=over"        nextgroup=podOverIndent skipwhite contains=@NoSpell
syn match podCommand    "^=back"        contains=@NoSpell
syn match podCommand    "^=cut"         contains=@NoSpell
syn match podCommand    "^=pod"         contains=@NoSpell
syn match podCommand    "^=for"         nextgroup=podForKeywd skipwhite contains=@NoSpell
syn match podCommand    "^=begin"       nextgroup=podForKeywd skipwhite contains=@NoSpell
syn match podCommand    "^=end"         nextgroup=podForKeywd skipwhite contains=@NoSpell

" Text of a =head1, =head2 or =item command
syn match podCmdText	".*$" contained contains=podFormat,@NoSpell

" Indent amount of =over command
syn match podOverIndent	"\d\+" contained contains=@NoSpell

" Formatter identifier keyword for =for, =begin and =end commands
syn match podForKeywd	"\S\+" contained contains=@NoSpell

" An indented line, to be displayed verbatim
syn match podVerbatimLine	"^\s.*$" contains=@NoSpell

" Inline textual items handled specially by POD
syn match podSpecial	"\(\<\|&\)\I\i*\(::\I\i*\)*([^)]*)" contains=@NoSpell
syn match podSpecial	"[$@%]\I\i*\(::\I\i*\)*\>" contains=@NoSpell

" Special formatting sequences
syn region podFormat	start="[IBSCLFX]<[^<]"me=e-1 end=">" oneline contains=podFormat,@NoSpell
syn region podFormat	start="[IBSCLFX]<<\s" end="\s>>" oneline contains=podFormat,@NoSpell
syn match  podFormat	"Z<>"
syn match  podFormat	"E<\(\d\+\|\I\i*\)>" contains=podEscape,podEscape2,@NoSpell
syn match  podEscape	"\I\i*>"me=e-1 contained contains=@NoSpell
syn match  podEscape2	"\d\+>"me=e-1 contained contains=@NoSpell

" Define the default highlighting.
" Only when an item doesn't have highlighting yet

hi def link podCommand		Statement
hi def link podCmdText		String
hi def link podOverIndent	Number
hi def link podForKeywd		Identifier
hi def link podFormat		Identifier
hi def link podVerbatimLine	PreProc
hi def link podSpecial		Identifier
hi def link podEscape		String
hi def link podEscape2		Number

if exists("perl_pod_spellcheck_headings")
  " Spell-check headings
  syn clear podCmdText
  syn match podCmdText    ".*$" contained contains=podFormat
endif

if exists("perl_pod_formatting")
  " By default, escapes like C<> are not checked for spelling. Remove B<>
  " and I<> from the list of escapes.
  syn clear podFormat
  syn region podFormat start="[CLF]<[^<]"me=e-1 end=">" oneline contains=podFormat,@NoSpell
  syn region podFormat start="[CLF]<<\s" end="\s>>" oneline contains=podFormat,@NoSpell

  " Don't spell-check inside E<>, but ensure that the E< itself isn't
  " marked as a spelling mistake.
  syn match podFormat   "E<\(\d\+\|\I\i*\)>" contains=podEscape,podEscape2,@NoSpell

  " Z<> is a mock formatting code. Ensure Z<> on its own isn't marked as a
  " spelling mistake.
  syn match podFormat   "Z<>" contains=podEscape,podEscape2,@NoSpell

  " These are required so that whatever is *within* B<...>, I<...>, etc. is
  " spell-checked, but not the B, I, ... itself.
  syn match podBoldOpen    "B<" contains=@NoSpell
  syn match podItalicOpen  "I<" contains=@NoSpell
  syn match podNoSpaceOpen "S<" contains=@NoSpell
  syn match podIndexOpen   "X<" contains=@NoSpell

  " Same as above but for the << >> syntax.
  syn match podBoldAlternativeDelimOpen    "B<< " contains=@NoSpell
  syn match podItalicAlternativeDelimOpen  "I<< " contains=@NoSpell
  syn match podNoSpaceAlternativeDelimOpen "S<< " contains=@NoSpell
  syn match podIndexAlternativeDelimOpen   "X<< " contains=@NoSpell

  " Add support for spell checking text inside B<>, I<>, S<> and X<>.
  syn region podBold start="B<[^<]"me=e end=">" oneline contains=podBoldItalic,podBoldOpen
  syn region podBoldAlternativeDelim start="B<<\s" end="\s>>" oneline contains=podBoldAlternativeDelimOpen

  syn region podItalic start="I<[^<]"me=e end=">" oneline contains=podItalicBold,podItalicOpen
  syn region podItalicAlternativeDelim start="I<<\s" end="\s>>" oneline contains=podItalicAlternativeDelimOpen

  " Nested bold/italic and vice-versa
  syn region podBoldItalic contained start="I<[^<]"me=e end=">" oneline
  syn region podItalicBold contained start="B<[^<]"me=e end=">" oneline

  syn region podNoSpace start="S<[^<]"ms=s-2 end=">"me=e oneline contains=podNoSpaceOpen
  syn region podNoSpaceAlternativeDelim start="S<<\s"ms=s-2 end="\s>>"me=e oneline contains=podNoSpaceAlternativeDelimOpen

  syn region podIndex start="X<[^<]"ms=s-2 end=">"me=e oneline contains=podIndexOpen
  syn region podIndexAlternativeDelim start="X<<\s"ms=s-2 end="\s>>"me=e oneline contains=podIndexAlternativeDelimOpen

  " Restore this (otherwise B<> is shown as bold inside verbatim)
  syn match podVerbatimLine	"^\s.*$" contains=@NoSpell

  " Ensure formatted text can be displayed in headings and items
  syn clear podCmdText

  if exists("perl_pod_spellcheck_headings")
    syn match podCmdText ".*$" contained contains=podFormat,podBold,
          \podBoldAlternativeDelim,podItalic,podItalicAlternativeDelim,
          \podBoldOpen,podItalicOpen,podBoldAlternativeDelimOpen,
          \podItalicAlternativeDelimOpen,podNoSpaceOpen
  else
    syn match podCmdText ".*$" contained contains=podFormat,podBold,
          \podBoldAlternativeDelim,podItalic,podItalicAlternativeDelim,
          \@NoSpell
  endif

  " Specify how to display these
  hi def podBold term=bold cterm=bold gui=bold

  hi link podBoldAlternativeDelim podBold
  hi link podBoldAlternativeDelimOpen podBold
  hi link podBoldOpen podBold

  hi link podNoSpace                 Identifier
  hi link podNoSpaceAlternativeDelim Identifier

  hi link podIndex                   Identifier
  hi link podIndexAlternativeDelim   Identifier

  hi def podItalic term=italic cterm=italic gui=italic

  hi link podItalicAlternativeDelim podItalic
  hi link podItalicAlternativeDelimOpen podItalic
  hi link podItalicOpen podItalic

  hi def podBoldItalic term=italic,bold cterm=italic,bold gui=italic,bold
  hi def podItalicBold term=italic,bold cterm=italic,bold gui=italic,bold
endif

let b:current_syntax = "pod"

let &cpo = s:cpo_save
unlet s:cpo_save

" vim: ts=8